NTI® - Network Technologies Incorporated

HDMI Over IP Range Extender,
HDTV 1080p plasma LCD display

CAT5, Extend Digital Video and Audio

Extend HDMI Digital Video & Audio Over IP Ethernet

Display an HDMI signal up to 1,000 feet away from the source over an IP network.

Also known as: Point-to-Point connection, Point-to-Many managed network switch, Media center extender, network HDMI monitor extender,
remote digital HDMI monitor, HDMI transmitter - receiver, HD extender, high definition extender, extend video audio, HDMI range extender, HDMI over IP extender.

Additional Product Information

 View Data Sheet Data Sheet (PDF)
 Extend HDMI over IP up to 333 feet

ST-IPHDMI-L-333 (Front & Back)

 



HDMI over IP Extender for use with Digital Signage  RoHS Compliant HDMI Extender

Features & Applications

The XTENDEX® HDMI Over IP Extender multicasts digital video and audio signals to one or more receivers. These extenders can be set up in a cascading configuration using CAT5e/6/7 cable up to 1,000 feet away and 333 feet using a single pair configuration.

Each HDMI Over IP Extender consists of a local unit that connects to an HDMI source, and a remote unit that connects to an HDMI display. The local and remote units can be connected together for a Point-to-Point connection, or through VLAN isolation on a managed network switch for a Point-to-Many connection.
  • Supports HDTV resolutions to 1080p and computer resolutions to 1920x1200 (WUXGA).
  • Ideal solution for digital signage applications.
  • Broadcast real-time HDMI video/audio to multiple display locations.
  • Transmits an HDMI signal over one CAT5e/6/7 cable.
  • Plug-and-Play installation allows receivers to find the transmitter automatically on the same network. (Network configuration may be required for Managed network switch.)
  • Built in default EDID configuration table.
  • Easily expandable. Add remote units as you add monitors.
  • Inexpensive CAT5e/6/7 cable replaces bulky video cables.
  • Support for multiple transmitters requires a Managed network switch with VLAN/IGMP support. Standard LAN switches can only support one transmitter.
    • The managed switch must support port based IEEE 802.1Q VLAN, IGMP, and permit duplicate IP addresses across the VLAN domains.
    • Each VLAN acts as a separate HDMI Over IP Channel on the network.
    • Cascade managed switches up to 3 levels, allowing the farthest display to be located up to 1,000 feet away from the source device. Each receiver can be located up to 333 feet from the managed switch.
  • Use a PC to access the built-in HTTP Interface of the managed network switch to control what signal is being watched at each location.
  • Built-in scaler function allows different input and output resolutions without having to lower the quality of the HDMI source.
  • Internal JPEG video compression adapts to available bandwidth if needed.
  • HDCP compliant.
  • Compliant with HDMI 1.3 standard.
  • Full IR control of HDMI source from remote HDTV extension in Point-to-Point connections.

Specifications

Local Unit
  • One female HDMI-A port for source connection.
  • One female 100Mbps RJ45 port for sending high definition video/audio signals and DDC signal.
  • One female 3.5mm port for IR emitter.
Remote Unit
  • One female HDMI-A port for HDTV or computer display.
  • One female 100Mbps RJ45 port for receiving high definition video/audio signals and DDC signal.
  • Signal type: HDMI 1.3, HDCP compliant.
  • Supports HDTV resolutions to 1080p and computer resolutions to 1920x1200 (WUXGA).
  • Supports Linear PCM and Dolby Digital 5.1 audio through HDMI compatible TVs or audio receivers.
  • Built-in IR receiver and one female 3.5mm port for optional IR receiver extension.
Power
  • Local and remote unit: 100 to 240 VAC at 50 or 60 Hz via AC adapter.
Cables
  • Use HDMI-xx-MM cable to connect an HDMI source or display (not included).
  • Use DVI-HDMI-xx-MM cable to connect a DVI source or display (not included).
  • Use CAT5e/6/7 UTP straight through cable for TIA/EIA-568B wiring terminated with standard RJ45 connectors (not included).
  • For IR extension, use 3-foot IR emitter IR-EMTR-3 and IR receiver IR-RCVR-3.
Dimensions
  • WxDxH (in): 5x4.5x1
Regulatory Approvals
  • CE, FCC, RoHS
Warranty
  • Two years.





Point-to-Point Configuration:


Connect between an HDMI source and a digital monitor up to 333 feet away.

Point-to-Many Configuration:


Connect between an HDMI source and multiple displays up to 333 feet away.

HDMI Over IP Extender via CAT5e/6/7

NTI Part # Local or
Remote Unit		 Price $ # to Quote # to Buy
ST-IPHDMI-L-333 Local 300
ST-IPHDMI-R-333 Remote 250

IR Emitter & Receiver

NTI Part # Description Price $ # to Quote # to Buy
IR-EMTR-3 IR Emitter, 3 feet 10
IR-RCVR-3 IR Receiver, 3 feet 12

HDMI Male-Male Cable

NTI Part # Length (ft) Price $ # to Quote # to Buy
HDMI-3-MM 3 5
HDMI-6-MM 6 6
HDMI-9-MM 9 8
HDMI-14-MM 14 11

DVI-D Male to HDMI-A Male Single Link Cable

NTI Part # Length (ft) Price $ # to Quote # to Buy
DVI-HDMI-3-MM 3 10
DVI-HDMI-6-MM 6 15
DVI-HDMI-10-MM 10 20
DVI-HDMI-15-MM 15 38
Request Quote